remote control via smartphone
Modem QSTART – LTE version
96,05 €
incl. VAT
1 in stock
Modem QSTART is a Plug & Play device with the ability to use Autoterm Control application on smartphone (available at Google Play and AppStore) to control any AUTOTERM air heater and liquid heaters.
Application “Autoterm Control” together with modem QSTART will let you to operate and oversee your Autoterm heater via GSM / LTE network.
Main advantages of “Autoterm Control” application:
- Remote Start/Stop of heater
- Start heater with pre-set working duration
- Current status check
- Temperature check
- Operation settings
* Modem QSTART uses micro sim card slot
To increase wiring length from modem QSTART till control panel a 2.6 meter extension wiring for control panels (assy.4269) can be used.
The wiring length from the control panel to the modem must not exceed 10 meters.
** Please note, For Modem QSTART to be connected to AUTOTERM Air series heater a 1.8 meter control panel wire (assy.2067) must be used.
The wiring length from the heater to modem must not exceed 2 meters.
*** Please note, Modem QSTART will not work if heater is equipped with control panel PU-22.
For modem QSTART to work, control panel of the heater must be changed to control panel PU-5, PU-27 or Comfort Control.
Package contains:
1 x Modem QSTART (LTE version)
1 x Antenna
1 x Harness for Modem Qstart (assy.3282)
1 x Quick start guide (manual)
Supported GSM bands:
GSM/GPRS: 900/1800 Мhz
Supported LTE bands:
| LTE Band | Up-link Band (MHz) | Down-link Band (MHz) | Band Width (MHz) | Duplex Spacing (MHz) | Band Gap (MHz) |
| LTE Band 1 | 1920-1980 | 2110-2170 | 60 | 190 | 130 |
| LTE Band 3 | 1710-1785 | 1805-1880 | 75 | 95 | 20 |
| LTE Band 5 | 824-849 | 869-894 | 25 | 45 | 20 |
| LTE Band 7 | 2500-2570 | 2620-2690 | 70 | 120 | 50 |
| LTE Band 8 | 880-915 | 925-960 | 35 | 45 | 10 |
| LTE Band 20 | 832-862 | 791-821 | 30 | 41 | 71 |
| LTE Band 28 | 703-748 | 758-803 | 45 | 55 | 10 |
Modem Qstart is compatible with the following AUTOTERM heaters:
- AUTOTERM Air 2D if connected to PU-5 / PU-27 / Comfort Control control panel
- AUTOTERM Air 4D if connected to PU-5 / PU-27 / Comfort Control control panel
- AUTOTERM Air 8D if connected to PU-5 / PU-27 / Comfort Control control panel
- AUTOTERM Air 9D if connected to PU-5 / PU-27 / Comfort Control control panel
- AUTOTERM Flow 5 (Diesel/Petrol) with serial numbers that start with “E….” if connected to PU-27 or Comfort Control control panel
- AUTOTERM Flow 14D if connected to PU-27 or Comfort Control control panel
To connect QSTART modem to liquid heater AUTOTERM Flow 14D, you will also need a special Modem harness-adapter (assy.3814).
